About this deal
The PTFE / silicone element contained within the GT85 spray makes this a more effective lubricant than products such as WD40 for instance, which are basically water displacement products with limited lubrication qualities. As well as being a good lubricant, PTFE also acts as an effective water repellent. If the knob is hard to turn, consider lubricating the latch mechanism. Remove the knob (if possible), locate the latch mechanism, and apply a small amount of lubricant. Safety Precautions
After massaging, let the cleaner sit in the shade for 5-10 minutes (do not use sunlight or additional heat sources), then rinse thoroughly with clear water (high-pressure cleaner is recommended) until dirt and cleaner are flushed out. Leather and Fur Wash Concentrate is suitable for washing almost every kind of leather. This can be done in the washing machine,at a low temperature (under 35 °C (95 °F), the same as for wool. Rest assured that, provided you follow the instructions, the leather will not shrink and it will come out clean and soft.Amount: The Convertible Top Waterproofing protects the entire roof and offers water and grease repellent effects. It creates a lotus effect on the roof of your convertible. Especially stressed folding areas and seams are covered protectively. As a result, the roof is durably shielded from new dirt. The Artificial Leather Clean & Care Kit contains everything you need for the cleaning and care of strained artificial leather and plastic surfaces. Insert the tip of the straw (or nozzle of a dropper or tube for non-spray lubricants) into the keyhole.Apply the cleaning foam on a sponge or the brush. Never apply directly to the leather. Use the foam to clean the leather from seam to seam. If necessary, repeat the process several times. Remove the dirt and residue from the cleaner with a damp cloth and then let it dry. Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. UseMild Leather Cleaner for normal degrees of soiling orStrong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, applyLeather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple.
Remove the excess old leather Softener with the mild leather cleaner. Proceed as indicated under point 1.
Quick Quote
CAUTION: Please use the cleaner exclusively on textile surfaces. Cleaner residues on glass or paint surfaces can be removed without leaving traces, as long as they are not dried. If they are dry and crystallized, they can only be removed with a lot of effort. Traditional oils tend to attract dirt so should be avoided if possible, which is why a product like GT85 is a better choice for use as a cleaner / lubricant.
In cold temperatures, the Elephant Leather Preserver is not easy to work with. Therefore, work at a comfortable temperature or slightly heat the preserver with a hair dryer.For subsequent care, take some preserver with another cloth from the set and first rub in the rag. Apply a thin layer of care to the leather with the cloth and polish if you want it to shine.
suitable for several vehicle interiors and furniture sets or boat interiors (Please ask us for 1 liter set) . TOP Life is a new coating for leather, imitation leather and plastic parts, which specifically seals the surface for a long time.It is a finishing topcoat (clearcoat)The DIY version can be applied with a sponge (for end customers).The professional version must be sprayed!It barely effects the gloss levelIt offers high protectionIt barely changes the surface appearance (slightly shiny/slightly slippery => goes away within 48 hours)It has up to 12 months service life Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzzPins: These consist of key pins (which touch the key when inserted) and driver pins. The correct key will align these pins at the shear line, allowing the plug to rotate.